Guide

Tote Bag Dimensions: How to Specify a Custom Size

Define tote bag dimensions for a custom order with clear width, height, and depth points, then check the size against the intended contents on a sample.

Updated October 30, 2026 | 3 min read | Published by Oksaur Outdoor

Tote BagsBag DimensionsProduct Specification
Plain black tote bag hanging from a wooden rack against a warm neutral wall

Start with a real reference size

The structured zip-top tote on the site is listed at 41 × 29 × 12 cm. Use those figures only if that model is your reference. For a different size, mark the exact dimension to change in the brief. Replace “a little bigger” with a number, and keep the unit consistent.

Name each measurement

Write width, height, and depth as separate values. Draw arrows on a simple sketch to show the endpoints. For example, specify whether width is measured at the base or top opening, height from the base seam to the top edge, and depth across the side panel. Note whether the sample is empty or carrying the intended items, then use that same condition for later comparisons.

Keep the opening in the size brief

A zip-top opening is worth a separate line in the size brief. Add its finished length and mark the zipper ends on the sketch. Mark the body measurement points too, so the brief and sample can be checked against the same references. After changing the body size, test the zipper and pockets with the items on the load list.

Check dimensions against the intended load

The structured tote listing says its main compartment carries a tablet, notebook, phone, wallet, and daily essentials. For your sample, lay out the items you plan to carry and check their fit in the main compartment. Then open the zip-top, inner zip pocket, and slip pockets with the contents in place. Keep the item list with the sample notes.

Put the approved size in writing

Keep the approved dimensions, unit, measurement points, and sample status together in one specification. For this tote, the listed reference is 41 × 29 × 12 cm. Write any change as a new target and check it against the approved sample. Update the document when a measurement changes, so the latest value is easy to find.

Discuss custom tote bag dimensions

Send the model number, quantity, artwork, destination, and required date. We will reply with the remaining questions needed for pricing and sampling.