How to Specify End Compartments for a Cylinder Training Duffel
Define cylinder training duffel end compartments around the items they hold, zipper access, the shoulder strap, and checks on an approved sample.
Updated October 4, 2026 | 4 min read | Published by Oksaur Outdoor

Start with what each end compartment must hold
Model 2610 is listed as a rounded training bag with a front zipper pocket, a shoulder strap, and end compartments. Decide what each end area must hold, such as footwear or small training gear, before setting the opening and panel details.
Set the opening and compartment path
Record the finished opening, depth, panel shape, zipper direction, and which end of the bag each compartment uses. If both ends should match, say so. If they serve different items, give each side its own purpose and sample check.
Keep the front pocket and strap clear
The 2610 layout includes a front zipper pocket and a shoulder strap. Map the end compartment openings against the front pocket, strap clips, and main compartment so one access path does not block another when the bag is worn.
Match the compartment to the polyester body
The product record lists polyester outer and lining options, with exact construction confirmed by the sample. Review zipper tape, end-panel seams, binding, and any reinforcement with the selected fabric before approval.
Test the loaded training setup
Put the intended items in the end compartments, front zipper pocket, and main compartment. Wear the sample with the shoulder strap, open each access point, and check reach, balance, and shape while the bag carries its planned load.
Record the approved construction
Keep the compartment count, end assignment, opening details, finished clearances, zipper, reinforcement, fabric, colour, sample changes, logo, labels, and packaging in one record. Model 2610 allows size, fabric, colour, compartments, logo, labels, and packaging changes.
Discuss a custom duffel compartment layout
Send the model number, quantity, artwork, destination, and required date. We will reply with the remaining questions needed for pricing and sampling.